PCO Żarów
Ground fireclay, 25 kg each
In stock
Price range: 10,00 € through 10,60 €Ground fireclay is fireclay material that has been ground into fine powder or fine particles. It is usually obtained from fired fireclay which has been heated at high temperatures (around 1400-1600 °C) and then ground to the desired fraction.
Corundum rubble BOK 160, 25 kg
In stock
29,00 €For use in refractory concretes. Highly resistant to abrasion and alkali attack.
Chamotte refractory brick Superton AL44 1FE8
In stock
8,85 €The SUPERTON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions, up to 1400 °C. These bricks are characterised by a reduced iron oxide (Fe₂O₃) content (less than 2%).
Chamotte refractory brick Normaton AS KO70
In stock
7,30 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Andalux A60 1X10, 69/59x230x230 mm
Out of stock
17,18 €The ANDALUX product line consists of a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters. They are suitable for use in all heat-resistant linings under average working conditions up to 1550 °C.
Perlitex LPN-5 lightweight concrete insulation brick, 230x114x64 mm
In stock
1,33 €PERLITEX insulation bricks are produced by hydraulic pressing. This process produces a product with excellent thermal conductivity and very low density. Their typical recommended use is as a second layer of insulation for boiler linings.
Support arm Normaton AS 101, 230x68x196x114x34 mm
In stock
9,70 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Insulating brick ISOLUX 1L10s, 1,05 g/cm³, 230x114x64 mm
Out of stock
3,27 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Insulating brick ISOLUX L10x, 1,05 g/cm³, 230x114x64 mm
In stock
2,90 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Insulating brick ISOLUX L6s, 0,67 g/cm³, 230x114x64 mm
Out of stock
3,03 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Insulating brick ISOLUX L8s, 0,85 g/cm³, 230x114x64 mm
Out of stock
3,63 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Insulating brick ISOLUX LA5s, 0,56 g/cm³, 230x114x64 mm
Out of stock
3,63 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Perlitex LPN-4 lightweight concrete insulation brick, 230x114x64 mm
Out of stock
1,09 €PERLITEX insulation bricks are produced by hydraulic pressing. This process produces a product with excellent thermal conductivity and very low density. Their typical recommended use is as a second layer of insulation for boiler linings.
Shoulder support Andalux A60 104, 230x140x262x114x50 mm
In stock
49,85 €The ANDALUX product line consists of a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters. They are suitable for use in all heat-resistant linings under average working conditions up to 1550 °C.
Support arm Normaton AS 102, 230x115x262x114x62 mm
In stock
13,30 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Support arm Normaton AS 104, 230x140x262x114x50 mm
In stock
14,55 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Support arm Normaton AS 202, 250x154x270x123 mm
Out of stock
30,25 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Diatomaceous aggregate BB-Filler, 25 kg
Out of stock
36,30 €It is used in insulating aggregates and insulating concrete.
Ceramic anker Andalux A65 L340
In stock
18,15 €The ANDALUX product line offers a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters.
MULCAST BM50M cast-in-place concrete, 25kg
In stock
Original price was: 45,00 €.42,35 €Current price is: 42,35 €.Medium cement refractory cast-in-place concrete (MCC) is characterised by bonding with a cement content of 5-15 %. In terms of properties and workability, this cement occupies an intermediate position between conventional and low-cement refractory mortars.
This concrete is most suitable for use in industrial structures operating at high temperatures. It is used for the internal lining of refractory structures such as stoves, furnaces, boilers burning biofuels.
Suitable for use up to 1500 °C.
Cast-in-place concrete MULCAST BN50M, 25kg
Out of stock
40,84 €Low cement refractory cast-in-place concrete (LCC) with an extremely low cement content (3 to 10%) required to achieve bond. This makes it more demanding than, for example, conventional concretes, but when properly lined, it has better properties: higher temperature resistance, lower porosity, resistance to corrosion, abrasion and thermal loads.
Cast-in-place concrete MULCAST BN50M5Zr, 25kg
Out of stock
51,12 €Low cement refractory cast-in-place concrete (LCC) is characterised by an extremely low cement content (between 3 and 10%) required to achieve bond. As a result, their installation requires more attention than, for example, conventional concretes, but a properly executed lining has better properties: higher temperature resistance, lower porosity, corrosion and abrasion resistance, and resistance to thermal loads.
Cast-in-place concrete MULCAST BN80MZr, 25kg
Out of stock
68,06 €Low cement refractory cast-in-place concrete (LCC) is characterised by an extremely low cement content (between 3 and 10%) required to achieve bond. As a result, their installation requires more attention than, for example, conventional concretes, but a properly executed lining has better properties: higher temperature resistance, lower porosity, corrosion and abrasion resistance, and resistance to thermal loads.
Cast-in-place concrete PCOCAST BM145R, 25kg
Out of stock
41,30 €Medium cement refractory cast-in-place concrete (MCC) is characterised by bonding with a cement content of 5-15 %. In terms of properties and workability, they occupy an intermediate position between conventional and low cement refractories.
These mixes are valued by professionals for their good properties, which are already achieved at low temperatures (even before the plant is started up), and for their better workability compared to low-cement or no-cement systems.
