Gypsum for ceramics, snow white ATL-GM, 20 kg

FACILITY

– for the production of tiles, panels, plaster and plaster additives
– for the production of ceramic moulds in industry
– as a binding agent in the preparation of plaster mortars (gypsum, putty)
– for the repair of wall and ceiling surfaces (e.g. filling of cavities, filling of pinholes, etc.)
– for assembling and installation work (assembly boxes, groove filling)

FEATURES

– gypsum bonding agent obtained by partial dehydration and grinding of natural gypsum stone
– very fine grains
– high resistance parameters
– snow-white colour
– fast drying
– convenience and ease of use
– eco-friendly product

PREPARATION OF THE MASS

SNOW WHITE CERAMIC GYPSE is prepared for use by evenly pouring the dry mixture into a container containing a measured quantity of clean water and then mixing it, either manually or mechanically, until a homogeneous mass is obtained, free from lumps and crushed ingredients. The recommended mixing ratio is approximately 0,8 litre of water per kg of gypsum (the consistency of the mortar should be adjusted according to the individual production objectives or type of application). The mass is ready for use as soon as it is mixed and remains plastic for about 10 minutes. Before mixing the next batch of material, remove any hardened mortar residue from the container, which may reduce the setting time of the next mortar.