PCO Żarów
Ground fireclay, 25 kg each
In stock
Price range: 10,00 € through 10,60 €Ground fireclay is fireclay material that has been ground into fine powder or fine particles. It is usually obtained from fired fireclay which has been heated at high temperatures (around 1400-1600 °C) and then ground to the desired fraction.
Corundum rubble BOK 160, 25 kg
In stock
29,00 €For use in refractory concretes. Highly resistant to abrasion and alkali attack.
Chamotte refractory brick Superton AL44 1FE8
In stock
8,85 €The SUPERTON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions, up to 1400 °C. These bricks are characterised by a reduced iron oxide (Fe₂O₃) content (less than 2%).
Chamotte refractory brick Normaton AS KO70
In stock
7,30 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Perlitex LPN-5 lightweight concrete insulation brick, 230x114x64 mm
In stock
1,33 €PERLITEX insulation bricks are produced by hydraulic pressing. This process produces a product with excellent thermal conductivity and very low density. Their typical recommended use is as a second layer of insulation for boiler linings.
Support arm Normaton AS 101, 230x68x196x114x34 mm
In stock
9,70 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Insulating brick ISOLUX L10x, 1,05 g/cm³, 230x114x64 mm
In stock
2,90 €The ISOLUX product line consists of various types of insulation bricks for high temperature industrial applications with operating temperatures ranging from 500 °C to 1400 °C. Despite their low density, these bricks have excellent mechanical properties with compressive strengths of up to 21 N/mm². ISOLUX bricks are specially designed for use as an insulating layer in furnace linings, ensuring thermal efficiency and structural strength.
Shoulder support Andalux A60 104, 230x140x262x114x50 mm
In stock
49,85 €The ANDALUX product line consists of a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters. They are suitable for use in all heat-resistant linings under average working conditions up to 1550 °C.
Support arm Normaton AS 102, 230x115x262x114x62 mm
In stock
13,30 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Support arm Normaton AS 104, 230x140x262x114x50 mm
In stock
14,55 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Ceramic anker Andalux A65 L340
In stock
18,15 €The ANDALUX product line offers a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters.
MULCAST BM50M cast-in-place concrete, 25kg
In stock
Original price was: 45,00 €.42,35 €Current price is: 42,35 €.Medium cement refractory cast-in-place concrete (MCC) is characterised by bonding with a cement content of 5-15 %. In terms of properties and workability, this cement occupies an intermediate position between conventional and low-cement refractory mortars.
This concrete is most suitable for use in industrial structures operating at high temperatures. It is used for the internal lining of refractory structures such as stoves, furnaces, boilers burning biofuels.
Suitable for use up to 1500 °C.
ISOCAST BI-11/0.9 cast-in-place insulating concrete, 25kg
In stock
Original price was: 34,70 €.31,75 €Current price is: 31,75 €.This mixture is made using light clams and shale. It provides excellent mechanical strength when used as insulation layers in fire-resistant structures.
Suitable for use up to 1100 °C.
Ground clay GM1, 25 kg
In stock
12,00 €Quality clay, ideal for use in ceramics, also used as an adhesive in refractory mixes and concretes.
Fireclay MORTISOL ZL, 25 kg
In stock
Original price was: 26,00 €.24,20 €Current price is: 24,20 €.Insulating heat-resistant mortar
MORTISOL dry insulating mortars are the right choice for heat-resistant brickwork. The use of a dedicated mortar ensures uniform insulation layer properties, with a similar temperature distribution profile between brick and mortar. Most suitable for use with Isolux bricks.
MORTALEX ZAND fireclay, 25 kg
In stock
Original price was: 26,00 €.23,90 €Current price is: 23,90 €.Dry heat resistant mortar
The MORTALEX range of dry heat resistant mortars is designed to be adapted to every type of brick produced. This combination ensures uniform properties in every layer of the tiling.This mortar requires mixing with water and only achieves the required strength when the tiling is heated to the specified temperature. Most suitable for use with Andalux bricks.
Andalux A60 1FE8 chamotte refractory brick
In stock
8,75 €The ANDALUX product line offers a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters.
Chamotte refractory brick Normaton AS 1FE8
In stock
5,10 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Chamotte refractory brick Normaton AS DN5
In stock
3,90 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Chamotte refractory brick Normaton AS DN6
In stock
3,90 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Chamotte refractory brick Normaton AS DN9
In stock
6,05 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Chamotte refractory brick Normaton AS KO80
In stock
16,95 €The NORMATON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions up to 1350 °C.
Chamotte refractory brick Superton AL44 1FE4
In stock
7,75 €The SUPERTON product line is made up of standard fireclay products. They are suitable for use in all heat-resistant linings under average working conditions, up to 1400 °C. These bricks are characterised by a reduced iron oxide (Fe₂O₃) content (less than 2%).
Andalux A60 1X24 chamotte refractory double vertical arch brick, 76x52x230x230 mm
In stock
18,65 €The ANDALUX product line consists of a wide variety of andalusite brick options. The most common offerings are bricks containing 60% aluminium oxide (Al₂O₃) or products with increased strength parameters. They are suitable for use in all heat-resistant linings under average working conditions up to 1550 °C.
