Heat-resistant mixtures
Brands
Skamol Adhesive, 20 kg
Available on backorder
34,00 €Skamol Adhesive is a dry cement-based adhesive specially developed for the installation and bonding of Skamol calcium silicate boards. The adhesive is used to bond Skamol calcium silicate boards to properly prepared mineral substrates, such as masonry and concrete, as well as for bonding the edges of the boards together
Skamol Glue for calcium silicate boards, 0,5 kg
In stock
7,00 €Skamol Glue is a special high-temperature-resistant adhesive designed for bonding Skamol calcium silicate boards together. Due to its mineral composition, it may also be used for bonding other suitable mineral and heat-resistant surfaces, provided that material compatibility is assessed beforehand.
Skamol Primer for Calcium Silicate Boards, 3L
In stock
30,00 €Skamol Primer – a ready-to-use primer based on colloidal silicon dioxide. It is designed to prepare the surfaces of calcium silicate boards prior to bonding, plastering, or other further processing.
Skamol Smooth Plaster, 15 kg
Available on backorder
30,50 €Skamol Smooth Plaster is a white, smooth finishing plaster specially developed for the final surface finishing of Skamol calcium silicate boards. This plaster creates a smooth, uniform, and aesthetically pleasing surface.
Skamol Structural Plaster, 20 kg
Available on backorder
35,50 €Skamol Structural Plaster is a ready-to-use dry structural plaster mix specially developed for the final surface finishing of Skamol calcium silicate boards.
BLAKITE Refractory Adhesive, 2,5 kg
Out of stock
16,00 €An unrivalled, extremely heat-resistant cement mortar, dark grey in colour. This mortar is specially formulated for all types of chamotte refractory bricks and insulating bricks and is ideal for bonding calcium silicate and vermiculite panels. It can also be used for bricks with the highest durability and high alumina content, which are used at temperatures up to 1650 ˚C. Fully set in 48 hours according to the manufacturer’s recommendations, but at a constant temperature of 150 ˚C it is fully set after 4 hours.
Ground clay GM1, 20 kg
In stock
12,00 €Quality clay, ideal for use in ceramics, also used as an adhesive in refractory mixes and concretes.
MORTISOL ZL Fireclay Mortar, 25 kg
In stock
Original price was: 26,00 €.24,20 €Current price is: 24,20 €.Insulating heat-resistant mortar
MORTISOL dry insulating mortars are the right choice for heat-resistant brickwork. The use of a dedicated mortar ensures uniform insulation layer properties, with a similar temperature distribution profile between brick and mortar. Most suitable for use with Isolux bricks.
MORTISOL ZLPN Fireclay Mortar, 25 kg
Out of stock
21,18 €MORTISOL Dry Insulating Mortar is the right choice for heat-resistant brickwork. The use of a dedicated mortar ensures uniform insulation layer properties, with a similar temperature distribution profile between brick and mortar.
MORTALEX 145 Fireclay Mastic, 20 kg
Out of stock
30,40 €Ready-to-use heat-resistant mastic
MORTALEX – heat-resistant wet mastic/adhesive – ready to use immediately. For bonding heat-resistant bricks and lightweight insulation products (calcium silicate and semi dense panels). They have the advantage that the bond is strong immediately after application, without the need for additional heating.
M-20KB Fireclay Mortar, 25 kg
In stock
Original price was: 30,00 €.27,00 €Current price is: 27,00 €.This gauge is designed for acid-resistant bricks. It is also suitable for the repair of domestic stoves.
MORTALEX 135 Refractory Mastic, 20 kg
Out of stock
21,79 €Ready-to-use heat-resistant mastic
MORTALEX – heat-resistant wet mastic/adhesive – ready to use immediately. For bonding heat-resistant bricks and lightweight insulation products (calcium silicate and semi dense panels). They have the advantage that the bond is strong immediately after application, without the need for additional heating.
MORTALEX ZAND fireclay, 25 kg
In stock
34,00 €Dry heat resistant mortar
The MORTALEX range of dry heat resistant mortars is designed to be adapted to every type of brick produced. This combination ensures uniform properties in every layer of the tiling.This mortar requires mixing with water and only achieves the required strength when the tiling is heated to the specified temperature. Most suitable for use with Andalux bricks.
BLAKITE Refractory Adhesive, 20 kg
In stock
59,00 €An unrivalled, extremely heat-resistant cement mortar, dark grey in colour. This mortar is specially formulated for all types of chamotte refractory bricks and insulating bricks and is ideal for bonding calcium silicate and vermiculite panels. It can also be used for bricks with the highest durability and high alumina content, which are used at temperatures up to 1650 ˚C. Fully set in 48 hours according to the manufacturer’s recommendations, but at a constant temperature of 150 ˚C it is fully set after 4 hours.
MTS36/0.5 Fireclay Mortar, 25 kg
In stock
13,00 €Used for chamotte refractory bricklaying. Most suitable for bricks of the Normaton and Superton lines.
Perfect for both domestic and industrial use.
